Security Set Trigger Secondarystartport - Ericsson HM4x0 Reference Manual

19.28

security set trigger secondarystartport

19.28.1 Syntax
security set trigger <name> secondarystartport
<portnumber>
19.28.2 Description
This command sets the start of the secondary port number for an existing
trigger. It allows you to restrict the ports that a trigger will open, however, this
is not usually necessary.
19.28.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option
name
portnumber
19.28.4 Example
--> security set trigger t3 secondarystartport 1923
2/1553-ZAT 759 94 Uen B – December 2005
Description
A name that identifies an existing
trigger. To display trigger names, use
the security list triggers
command.
Sets the start of the trigger's
secondary port range.
Security CLI Commands
Default value
N/A
N/A
571