Bridge Clear Interfacevlanstats - Ericsson HM4x0 Reference Manual

Bridge CLI Commands
4.24

bridge clear interfacevlanstats

4.24.1 Syntax
bridge clear interfacevlanstats
[{<vlanname>|<vlannumber>} [<interfacename>]]
4.24.2 Description
This command clears the statistics for:
•
•
•
It reset all the statistical information that is displayed by the bridge list
interfacevlanstats command, to zero.
4.24.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option
vlanname
vlannumber
interfacename
4.24.4 Example
--> bridge clear interfacevlanstats
--> bridge clear interfacevlanstats VLAN_1
--> bridge clear interfacevlanstats VLAN_1 bridge1
62
All the egress interfaces across all the VLANs.
All the egress interfaces for the named VLAN.
A particular egress interface for the named VLAN.
Description
The name of an existing VLAN. See
the bridge add vlan command
to configure a new VLAN.
A number that identifies an existing
VLAN. To display the list of statically
configured VLANs, use the bridge
list static vlans command.
The number appears in the first
column under the heading ID.
The name of an egress interface of
the VLAN.
Default value
N/A
N/A
N/A
2/1553-ZAT 759 94 Uen B – December 2005