Dhcpclient Set Interfaceconfig Forcerenew Enabled|Disabled - Ericsson HM4x0 Reference Manual

DHCP Client CLI Commands
5.22 dhcpclient set interfaceconfig forcerenew
enabled|disabled
5.22.1 Syntax
dhcpclient set interfaceconfig {<name>|<number>}
forcerenew {enabled|disabled}
5.22.2 Description
This command sets whether or not the DHCP client is allowed to respond to
DHCPFORCERENEW requests received on the appropriate interface. If such
a request is accepted, the DHCP client will attempt to renew its lease early or,
if using DHCPINFORM, will attempt to obtain a new set of configuration
parameters from the DHCP server.
5.22.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option
name
number
enabled
disabled
5.22.4 Example
--> dhcpclient set interfaceconfig config1 forcerenew
enabled
138
Description
A name that identifies an existing
DHCP client interface. To display
client interface names, use the
dhcpclient list
interfaceconfigs command.
A number that identifies an existing
DHCP client interface. To display
client interface numbers, use the
dhcpclient list
interfaceconfigs command.
DHCP client is allowed to respond to
DHCPFORCERENEW requests.
DHCP client is not allowed to
respond to DHCPFORCERENEW
requests.
Default value
N/A
N/A
disabled
2/1553-ZAT 759 94 Uen B – December 2005