Nat Show Resvmap - Ericsson HM4x0 Reference Manual

14.17

nat show resvmap

14.17.1 Syntax
nat show resvmap <name> <interfacename>
14.17.2 Description
This command displays the following information about a single reserved
mapping configuration that has been added to an outside security interface.
14.17.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option
name
interfacename
14.17.4 Example
--> nat show resvmap rm1 extinterface
NAT reserved mapping: rm1
Global IP address: 192.168.103.15
Internal IP address: 20.20.20.20
Transport type: tcp
Port number: 25
2/1553-ZAT 759 94 Uen B – December 2005
Description
A name that identifies an existing
global IP address. To display global
IP addresses, use the nat list
resvmaps command.
The name of an existing security
interface (external or DMZ) created
and connected to an inside interface
(DMZ or internal) using the nat
enable command. To display
security interfaces, use the
security list interfaces
command.
NAT CLI Commands
Default value
N/A
N/A
363