Rfc1483 Set Transport Prilevels - Ericsson HM4x0 Reference Manual

18.12

rfc1483 set transport prilevels

18.12.1 Syntax
rfc1483 set transport {<name>|<number>} prilevels
<prilevels>
18.12.2 Description
This command enables support for multiple packet priority levels on the same
ATM VC.
The following prilevel values are supported:
•
•
18.12.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option
name
number
prilevels
18.12.4 Example
--> rfc1483 set transport my1483 prilevels 2
2/1553-ZAT 759 94 Uen B – December 2005
1; there are no multiple priority levels enabled so the feature is disabled.
2; packets with different priorities set (such as best effort and high priority
traffic) are prioritized on the same ATM VC.
Description
A name that identifies an existing
RFC1483 transport. To display
transport names, use the rfc1483
list transports command.
A number that identifies an existing
RFC1483 transport. To display
transport numbers, use the rfc1483
list transports command.
The number of priority levels available
on an ATM transport.
RFC1483 CLI Commands
Default value
N/A
N/A
1
527