Security Set Ids Victimprotection - Ericsson HM4x0 Reference Manual

19.36

security set IDS victimprotection

19.36.1 Syntax
security set IDS victimprotection <duration>
19.36.2 Description
This command sets the duration of the victim protection Intrusion Detection
Setting (IDS). If victim protection is enabled, packets destined for the victim
host of a spoofing style attack are blocked. This command allows you to
specify the duration of the block time limit.
Note:
19.36.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option
duration
19.36.4 Example
--> security set IDS victimprotection 800
2/1553-ZAT 759 94 Uen B – December 2005
This CLI command is case-sensitive. You must type the command
attributes exactly as they appear in the syntax section of this page. If
you do not use the same case-sensitive syntax, the command fails
and the CLI displays a syntax error message.
Description
The length of time (in seconds) that
packets destined for the victim of a
spoofing style attack are blocked for.
Security CLI Commands
Default value
600
(10 minutes)
581