Firewall Show Validator - Ericsson HM4x0 Reference Manual

Firewall CLI Commands
10.15

firewall show validator

10.15.1 Syntax
firewall show validator <name> <policyname>
10.15.2 Description
This command displays information about a single validator that was added to
firewall policy using the firewall add validator command. The following
validator information is displayed:
•
•
•
•
10.15.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option
name
policyname
10.15.4 Example
--> firewall show validator v1
Firewall Host Validator: v1
Direction: both
Host IP: 192.168.103.2
Host Mask: 255.255.255.0
242
Validator name.
Direction (inbound, outbound or both).
Host IP address.
Host mask address.
Description
A name that identifies an existing
validator. To display validator names,
use the firewall list
validators command.
A name that identifies a firewall policy.
To display policy names, use the
firewall list policies
command.
Default value
N/A
N/A
2/1553-ZAT 759 94 Uen B – December 2005