Dhcpserver Set Fixedhost Ipaddress - Ericsson HM4x0 Reference Manual

DHCP Server CLI Commands
6.20

dhcpserver set fixedhost ipaddress

6.20.1 Syntax
dhcpserver set fixedhost <host name> ipaddress
<ipaddress>
6.20.2 Description
This command sets the IP address that will be allocated to a DHCP client by
the fixed host mapping.
Note:
6.20.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option
host name
ipaddress
6.20.4 Example
--> dhcpserver set fixedhost myhost ipaddress
192.168.219.2
170
You are not allowed to create a fixed host mapping with an IP
address that is already present inside a configured, dynamic IP range
on a subnet. The reverse is also forbidden; you cannot add
addresses into a dynamic IP range that are already configured as
fixed host addresses. The CLI will display a warning if you attempt to
do this.
Description
A name that identifies an existing
fixedhost. To display fixedhost
names, use the dhcpserver list
fixedhosts command.
The IP address that is assigned to a
DHCP client based on the client's
MAC address, displayed in the
following format:
192.168.102.3
Default value
N/A
N/A
2/1553-ZAT 759 94 Uen B – December 2005