Dhcpclient Add Interfaceconfig - Ericsson HM4x0 Reference Manual

5.2

dhcpclient add interfaceconfig

5.2.1 Syntax
dhcpclient add interfaceconfig <name> <ipinterface>
5.2.2 Description
This command configures DHCP client parameters for negotiation over an
existing IP interface. The client interface can only set the IP configuration if the
IP interface has DHCP enabled.
5.2.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option
name
ipinterface
5.2.4 Example
--> dhcpclient add interfaceconfig config1 IpInterface
2/1553-ZAT 759 94 Uen B – December 2005
Description
An arbitrary name that identifies the
client interface. It can be made up of
one or more letters or a combination
of letters and digits, but it cannot
start with a digit.
An IP address or a name that
identifies an existing IP interface.
The interface must have DHCP
enabled. To display interface
names, use the ip list
interfaces command.
DHCP Client CLI Commands
Default value
N/A
N/A
111