Table of Contents
Advertisement
19.31
security show trigger
19.31.1
Syntax
security show trigger <name>
19.31.2
Description
This command displays information about a single trigger that was added to
the Security module using the security add trigger command. The following
trigger information is displayed:
•
•
•
•
•
•
•
•
•
•
19.31.3
Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option
name
19.31.4
Example
--> security show trigger t1
Security Trigger: t1
2/1553-ZAT 759 94 Uen B – December 2005
Trigger name.
Transport type (TCP or UDP).
Start of the port range.
End of the port range.
Multiple host permission (true or false).
Maximum activity interval (in milliseconds).
Session chaining permission (true or false).
Session chaining on UDP permission (true or false).
Binary address replacement permission (true or false).
Address translation type (UDP, TCP, none or both).
Description
A name that identifies an existing
trigger. To display trigger names, use
the security list triggers
command.
Security CLI Commands
Default value
N/A
575
Advertisement
Table of Contents
