Ip Set Appservice - Ericsson HM4x0 Reference Manual

12.66

ip set appservice

12.66.1 Syntax
ip set appservice <name> secclasses <secClasses>
12.66.2 Description
This command allows you to set the security class(es) associated with an
AppService. A security class is synonymous with a security interface type. It is
assumed that you have already assigned security interfaces to your IP
interfaces, using the command security add interface.
Setting the security class(es) for an AppService defines the interface(s)
through which the AppService will be provided.
12.66.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option
name
secClasses
2/1553-ZAT 759 94 Uen B – December 2005
Description
A name that identifies an existing
AppService. To display AppService
names, use the ip list
appservices command.
Supported secClasses values are as
follows:
all – allows access to the AppService
via all existing security interfaces.
none – prevents access to the
AppService via any existing security
interface.
internal – allows access to the
AppService via existing internal
security interfaces.
external – allows access to the
AppService via existing external
security interfaces.
dmz – allows access to the
IP CLI Commands
Default value
N/A
all
331