PPPoA CLI Commands
16.21
pppoa set transport interface
16.21.1
Syntax
pppoa set transport {<name>|<number>} interface
<interface>
16.21.2
Description
This command sets the PPP interface for an existing PPPoA transport.
16.21.3
Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option
name
number
interface
16.21.4
Example
--> pppoa set transport pppoa1 interface 4
408
Description
A name that identifies an existing
PPPoA transport. To display transport
names, use the pppoa list
transports command.
A number that identifies an existing
PPPoA transport. To display transport
numbers, use the pppoa list
transports command.
The PPP interface to a channel that
transports PPPoA data. A single
interface can be used by multiple
changes. The interface value can be
any positive integer.
Default value
N/A
N/A
N/A
2/1553-ZAT 759 94 Uen B – December 2005