Pppoa Set Transport Theylogin - Ericsson HM4x0 Reference Manual

Table of Contents

Advertisement

PPPoA CLI Commands
16.42

pppoa set transport theylogin

16.42.1
Syntax
pppoa set transport {<name>|<number>} theylogin
{none|pap|chap}
16.42.2
Description
This command sets the authentication method that remote PPP clients must
use to dialin to the server. If authentication is used, clients must use the
specified authentication method and provide the username set using the
system add user command.
This command is only valid if the user has maydialin set using the system
set login maydialin command.
16.42.3
Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option
name
number
none
pap
434
Description
A name that identifies an existing
PPPoA transport. To display transport
names, use the pppoa list
transports command.
A number that identifies an existing
PPPoA transport. To display transport
numbers, use the pppoa list
transports command.
No authentication method is set.
Password Authentication Protocol; the
server sends an authentication
request to the remote user dialing in.
PAP passes the unencrypted
username and password and identifies
the remote end.
Default value
N/A
N/A
None
2/1553-ZAT 759 94 Uen B – December 2005

Advertisement

Table of Contents
loading

Table of Contents