Snmp Set Communityname - Ericsson HM4x0 Reference Manual

Table of Contents

Advertisement

20.4

snmp set communityname

20.4.1
Syntax
snmp set communityname <name> [[access <read|write>]
[community <community>] [manager <ipaddress>]
[permanently <enabled|disabled>] [temporarily
<enabled|disabled>]]
20.4.2
Description
This command allows you to change settings to a community name previously
added to the system using the snmp add communityname command.
20.4.3
Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option
name
community
manager
permanently
temporarily
20.4.4
Example
--> snmp set communityname tonyget access write
2/1553-ZAT 759 94 Uen B – December 2005
Description
A name that identifies an existing
community name. To display
community names, use the snmp
list communitynames command.
The community name of an existing
community. To display community
names, use the snmp list
communitynames command.
The IP address of the manager from
which requests are restricted by.
SNMP CLI Commands
Default value
N/A
N/A
N/A
Enabled
Enabled
611

Advertisement

Table of Contents
loading

Table of Contents