Bridge Set Interface Trafficclassmap - Ericsson HM4x0 Reference Manual

4.38

bridge set interface trafficclassmap

4.38.1 Syntax
bridge set interface {<name>|<number>} trafficclassmap
<pri0> <pri1> <pri2> <pri3> <pri4> <pri5> <pri6> <pri7>
4.38.2 Description
This command specifies the mapping of regenerated priority to their traffic
class value. See the bridge show interface trafficclassmap
command to see the traffic class mapping.
4.38.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option
name
number
pri0
pri1
pri2
pri3
2/1553-ZAT 759 94 Uen B – December 2005
Description
A name that identifies an existing
bridge interface. To display interface
names, use the bridge list
interfaces command.
A number that identifies an existing
bridge interface. To display interface
numbers, use the bridge list
interfaces command. The
number appears in the first column
under the heading ID.
The traffic class to which the
regenerated priority with value 0
should be mapped.
The traffic class to which the
regenerated priority with value 1
should be mapped.
The traffic class to which the
regenerated priority with value 2
should be mapped.
The traffic class to which the
regenerated priority with value 3
should be mapped.
Bridge CLI Commands
Default value
N/A
N/A
0
1
2
3
79