Nat Cli Commands; Summary - Ericsson HM4x0 Reference Manual

NAT CLI Commands

14 NAT CLI Commands
This chapter describes the NAT (Network Address Translation) CLI
commands.
14.1

Summary

The table below lists the NAT commands provided by the CLI:
nat enable
nat add globalpool
nat delete globalpool
nat list globalpools
nat add resvmap globalip tcp|udp
nat add resvmap interfacename
tcp|udp
nat clear resvmaps
nat list resvmaps
nat status
338
nat disable
nat clear globalpools
nat iketranslation
nat show globalpool
nat add resvmap globalip
nat add resvmap interfacename
nat delete resvmap
nat show resvmap
2/1553-ZAT 759 94 Uen B – December 2005