Dhcpserver Set Subnet Hostisdefaultgateway - Ericsson HM4x0 Reference Manual

DHCP Server CLI Commands
6.26

dhcpserver set subnet hostisdefaultgateway

6.26.1 Syntax
dhcpserver set subnet {<name>|<number>}
hostisdefaultgateway {enabled|disabled}
6.26.2 Description
This command tells the DHCP server to give out its own host IP address as
the default gateway address. This is useful when combined with DNS Relay.
6.26.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option
name
number
enabled
disabled
6.26.4 Example
--> dhcpserver set subnet sub1 hostisdefaultgateway
enabled
176
Description
A name that identifies an existing
subnet. To display subnet names, use
the dhcpserver list subnets
command.
A number that identifies an existing
subnet. To display subnet numbers,
use the dhcpserver list
subnets command.
Allows DHCP server to give out its
own host IP address as the default
gateway address.
Disallows DHCP server from giving
out its own host IP address as the
default gateway address.
Default value
N/A
N/A
disabled
2/1553-ZAT 759 94 Uen B – December 2005