Dhcpserver Set Subnet Subnet - Ericsson HM4x0 Reference Manual

6.29

dhcpserver set subnet subnet

6.29.1 Syntax
dhcpserver set subnet {<name>|<number>} subnet <ip
address> <netmask>
6.29.2 Description
This command allows you to change the IP address and netmask used by an
existing DHCP server subnet.
6.29.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option
name
number
ip address
netmask
6.29.4 Example
--> dhcpserver set subnet sub1 subnet 239.252.197.0
255.255.255.0
2/1553-ZAT 759 94 Uen B – December 2005
Description
A name that identifies an existing
subnet. To display subnet names, use
the dhcpserver list subnets
command.
A number that identifies an existing
subnet. To display subnet numbers,
use the dhcpserver list
subnets command.
The new IP address for the subnet,
displayed in the following format:
192.168.102.3
The new netmask address for the
subnet, for example:
255.255.255.0
DHCP Server CLI Commands
Default value
N/A
N/A
N/A
N/A
179