Dhcpclient Set Interfaceconfig Defaultroute Enabled|Disabled - Ericsson HM4x0 Reference Manual

5.18 dhcpclient set interfaceconfig defaultroute
enabled|disabled
5.18.1 Syntax
dhcpclient set interfaceconfig {<name>|<number>}
defaultroute {enabled|disabled}
5.18.2 Description
This command enables/disables whether DHCP client makes use of default
gateway information received from a DHCP server. If no DHCP
interfaceconfigs have been added to the system, by default DHCP client will
use default gateway information received from DHCP server.
5.18.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option
name
number
enabled
disabled
2/1553-ZAT 759 94 Uen B – December 2005
Description
A name that identifies an existing
DHCP client interface. To display
client interface names, use the
dhcpclient list
interfaceconfigs command.
A number that identifies an existing
DHCP client interface. To display
client interface numbers, use the
dhcpclient list
interfaceconfigs command.
DHCP client uses default gateway
information it receives from DHCP
server.
DHCP client does not use default
gateway information it receives from
DHCP server.
DHCP Client CLI Commands
Default value
N/A
N/A
enabled
131