Bridge Set Filterage - Ericsson HM4x0 Reference Manual

Bridge CLI Commands
4.9

bridge set filterage

4.9.1 Syntax
bridge set filterage <filterage>
4.9.2 Description
This command specifies the maximum age of filter table entries for the bridge.
The filter age for the bridge is displayed by the bridge show command.
4.9.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option
filterage
4.9.4 Example
--> bridge set filterage 1000
42
Description
The filter age is the time (in
seconds) after which MAC
addresses are removed from the
filter table when there has been no
activity. The time may be an integer
value between 10 and 100,000
seconds.
Default value
300
2/1553-ZAT 759 94 Uen B – December 2005