Table of Contents
Advertisement
PPPoE CLI Commands
17.2
pppoe add transport dialout pvc
17.2.1
Syntax
pppoe add transport <name> dialout pvc <interface> <port>
<vpi> <vci> [accessconcentrator <concentrator>]
[servicename <servicename>]
17.2.2
Description
This command creates a PPPoE transport that performs dialout over a PVC
(Permanent Virtual Circuit). It allows you to specify the following information:
•
•
•
•
•
•
The port/VPI/VCI combination must be unique for each transport.
17.2.3
Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option
name
450
The PPP interface to the channel that the PVC will use.
The ATM port that will transport data.
VPI (Virtual Path Identifier).
VCI (Virtual Circuit Identifier).
Access concentrator (optional).
Service name (optional)
Description
An arbitrary name that identifies the
transport. It can be made up of one or
more letters or a combination of letters
and digits, but it cannot start with a
digit.
Default value
N/A
2/1553-ZAT 759 94 Uen B – December 2005
Advertisement
Table of Contents
