Pppoe Set Transport Localip - Ericsson HM4x0 Reference Manual

PPPoE CLI Commands
17.29

pppoe set transport localip

17.29.1 Syntax
pppoe set transport {<name>|<number>} localip <ip-
address>
17.29.2 Description
This command tells the PPP process the local IP address to be associated
with the client-end of an interface. This allows remote users to have dialin
access via the channel(s) that the interface is attached to.
17.29.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option
name
number
ip-address
17.29.4 Example
--> pppoe set transport pppoe1 localip 192.168.103.2
482
Description
A name that identifies an existing
PPPoE transport. To display transport
names, use the pppoe list
transports command.
A number that identifies an existing
PPPoE transport. To display transport
numbers, use the pppoe list
transports command.
The IP address of the local 'client-end'
of an interface displayed in the
following format:
192.168.103.2
Default value
N/A
N/A
0.0.0.0
2/1553-ZAT 759 94 Uen B – December 2005