Pppoe Set Transport Accessconcentrator - Ericsson HM4x0 Reference Manual

17.7

pppoe set transport accessconcentrator

17.7.1 Syntax
pppoe set transport {<name>|<number>} accessconcentrator
<concentrator>
17.7.2 Description
This command specifies the access concentrator that you want PPPoE to
connect to.
You can also specify a service name using the set transport
servicename command so that PPPoE will only accept a specific service via
a specific access concentrator.
17.7.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option
name
interface
concen
trator
2/1553-ZAT 759 94 Uen B – December 2005
Description
A name that identifies an existing
PPPoE transport. To display transport
names, use the pppoe list
transports command.
A number that identifies an existing
PPPoE transport. To display transport
numbers, use the pppoe list
transports command.
A PPPoE tag that identifies a remote
access concentrator (or PPPoE
server). PPPoE will only connect to
the named access concentrator. If no
concentrator tag is set, PPPoE
connects to the first access
concentrator that responds. The tag
name/number is determined by your
ISP.
PPPoE CLI Commands
Default value
N/A
N/A
Empty string
457