Ip Interface Attachbridgevlan - Ericsson HM4x0 Reference Manual

IP CLI Commands
12.63

ip interface attachbridgevlan

12.63.1 Syntax
ip interface {<name>|<number>} attachbridgevlan
<vlantransport>
12.63.2 Description
This command attaches an existing IP interface to an existing VLAN transport.
The VLAN transport is added using the bridgevlan add transport
command.
12.63.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option
name
number
vlan
transport
12.63.4 Example
--> ip interface ip1 attachbridgevlan vtrans
328
Description
A name that identifies an existing IP
interface. To display interface names,
use the ip list interfaces
command.
A number that identifies an existing IP
interface. To display interface
numbers, use the ip list
interfaces command. The number
appears in the first column under the
heading ID.
The name of an existing VLAN
transport. To display transport names,
use the bridgevlan list
transports command.
Default value
N/A
N/A
N/A
2/1553-ZAT 759 94 Uen B – December 2005