Pppoa Set Transport Mcr - Ericsson HM4x0 Reference Manual

PPPoA CLI Commands
16.29

pppoa set transport mcr

16.29.1 Syntax
pppoa set transport {<name>|<number>} mcr <min cell rate>
16.29.2 Description
This command applies to existing PVC transports – it does not apply to SVC
transports. This command set the minimum cell rate for an existing PPPoA
transport.
16.29.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option
name
number
min cell rate
16.29.4 Example
--> pppoa set transport pppoa1 mcr 0
416
Description
A name that identifies an existing
PPPoA transport. To display transport
names, use the pppoa list
transports command.
A number that identifies an existing
PPPoA transport. To display transport
numbers, use the pppoa list
transports command.
Determines the minimum rate at which
ATM cells are allowed to be sent along
the PPPoA transport.
Default value
N/A
N/A
0
2/1553-ZAT 759 94 Uen B – December 2005