Bridge Show Interfacevlanstats - Ericsson HM4x0 Reference Manual

Bridge CLI Commands
4.26

bridge show interfacevlanstats

4.26.1 Syntax
bridge show interfacevlanstats {<vlanname>|<vlannumber>}
<interfacename>
4.26.2 Description
This command displays the statistical information of a single interface in the
egress interface of a named VLAN. It displays the following information about
the interfaces:
•
•
4.26.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option
vlanname
vlannumber
interfacename
4.26.4 Example
--> bridge show interfacevlanstats VLAN_1 bridge1
64
The number of frames received on the interface for the named VLAN.
The number of frames transmitted from the interface for the named VLAN.
Description
The name of an existing VLAN. See
the bridge add vlan command
to configure a new VLAN.
A number that identifies an existing
VLAN. To display the list of statically
configured VLANs, use the bridge
list static vlans command.
The number appears in the first
column under the heading ID.
The name of an egress interface of
the VLAN.
Default value
N/A
N/A
2/1553-ZAT 759 94 Uen B – December 2005