Table of Contents
Advertisement
System CLI Commands
22.4
system config backup
22.4.1
Syntax
system config backup [filename]
22.4.2
Description
This command saves the system configuration to a file. To specify the file that
you want to save configuration information in, type //isfs/ or //flashfs/
(depending on which directory the backup file is stored in) followed by a
filename value. If you do not specify a filename, the configuration is saved in
the //isfs/im.conf.backup file by default.
To prevent a user from overwriting the system with their own configuration,
only a Super user can use this command.
22.4.3
Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option
filename
22.4.4
Example
--> system config backup
Saving to backup configuration //isfs/im.conf.backup
--> system config backup //flashfs/mybackup
Saving to backup configuration //flashfs/mybackup
644
Description
The name of an existing file that you
want to save your configuration in. The
filename MUST be preceded by either
//isfs/ or //flashfs/.
Default value
If a filename is not
specified the
configuration is
saved in:
//isfs/im.conf.backup
2/1553-ZAT 759 94 Uen B – December 2005
Advertisement
Table of Contents
