Network Communication (Under Development) - Fuji Electric Monitouch V9 Series Connection Manual

1.3.3

Network Communication (Under Development)

Overview
 The optional communication interface unit "CUR-xx" is required to enable a network communication listed below.
Communication Interface
Unit
CUR-00
CUR-01
CUR-02
CUR-03
CUR-04
CUR-06
CUR-07
CUR-08
*1 In addition to UDP/IP communication with a PLC, screen program transfer, the MES interface function, and TELLUS & V-Server
connection can be enabled by connecting a PC. Use the built-in LAN port for TCP/IP communication.
 You can make settings for network communication in [Communication Setting] for the logical port PLC1. Thus, devices
available with only PLC1, as those used for multi-link or multi-link2, cannot be connected concurrently for network
communication.
V-SFT Ver. 6 Settings
For more information, refer to the communication unit specifications provided for each network.
Wiring
For more information, refer to the communication unit specifications provided for each network.
Network
Mitsubishi Electric
OPCN-1 OMRON
Fuji Electric
Fuji Electric
T-Link
Fuji Electric
Mitsubishi Electric
CC-LINK Ver.2.0 Mitsubishi Electric
Mitsubishi Electric
*1
Various PLCs
Ethernet
Siemens
PROFIBUS-DP
Universal PROFIBUS-DP
SX BUS Fuji Electric
DeviceNet
FL-Net Universal FL-Net
1.3 Connection Methods
Available Models
A series (OPCN-1)
SYSMAC C (OPCN-1)
MICREX-SX (OPCN-1)
MICREX-F (T-LINK)
MICREX SX (T-LINK)
A series (CC-LINK)
QnA series (CC-LINK)
QnH (Q) series (CC-LINK)
Ethernet UDP/IP communication
S7 PROFIBUS-DP
MICREX-SX (SX BUS)
-
1-41
Remarks
Under
development
Under
development
Under
development
Under
development
Under
development
Under
development
Under
development
Under
development