Micro Smart Pentra - Fuji Electric Monitouch V9 Series Connection Manual

3-4 3. IDEC
3.1.3

MICRO Smart Pentra

Communication Setting
Editor
Communication setting
Item
Connection Mode
Signal Level
Baud Rate
Data Length
Stop Bit
Parity
Target Port No.
Transmission Mode
PLC
Function setting (communication)
Item
Communication Type
Baud Rate (bps)
Data Bit Length
Parity
Stop Bit Length
Receive Timeout Time
Communication Device No.
Communication Selection Input
Function setting (other 2)
Item
32-bit Data Storage Setting
Setting
1 : 1 / 1 : n / Multi-link2 / Multi-link2 (Ethernet) /
1 : n Multi-link2 (Ethernet)
RS-232C / RS-422/485
4800 / 9600 / 19200 / 38400 / 57600 / 115K bps
7 / 8 bits
1 / 2 bits
None / Odd / Even
0 to 31
Little Endian / Big Endian
Setting
Maintenance communication
4800 / 9600 / 19200 / 38400 / 57600 /
115K bps
7 / 8 bits
None / Odd / Even
1 / 2 bits
Make settings in accordance with the
network environment.
0
X0000
Setting
From lower word / From higher word
Remarks
For the add-on communication module "FC5A-SIF2", the
maximum available rate is 38400 bps.
115 kbps is available only for the add-on communication module
"FC5A-SIF4".
From lower word: little endian
From higher word: big endian
Remarks
(Underlined setting: default)
(Underlined setting: default)
Remarks