Nx7/Nx Plus Series (70P/700P/Ccu) - Fuji Electric Monitouch V9 Series Connection Manual

17.1.1 NX7/NX Plus Series (70P/700P/CCU+)
Communication Setting
Editor
Communication setting
Item
Connection Mode
Signal Level
Baud Rate
Data Length
Stop Bit
Parity
Target Port No.
PLC
Be sure to match the settings to those made under [Communication Setting] of the editor.
System Information
Set a station number for the PLC using the PLC software "WINGPC". For more information, refer to the PLC manual issued by
the manufacturer.
Setting Item
CPU ID
Setting
1 : 1 / 1 : n / Multi-link / Multi-link2 /
Multi-link2 (Ethernet) /
1 : n Multi-link2 (Ethernet)
RS-232C / RS-422/485
4800 / 9600 / 19200 / 38400 / 57600 /115K bps
8 bits
1 bit
None
0 to 223, 255
Setting
0 to 223, 255
17.1 PLC Connection
(Underlined setting: default)
Remarks
For RS-485 connection, set the transmission delay
time to 3 msec or longer.
57600 bps and 115K bps supported by NX7R only
Remarks
17-3