Fuji Electric Monitouch V9 Series Connection Manual page 174

8-2 8. LS
8.1.1 MASTER-KxxxS
Communication Setting
Editor
Communication setting
Item
Connection Mode
Signal Level
Baud Rate
Data Length
Stop Bit
Parity
PLC
No particular setting is necessary on the PLC.
Calendar
Although this model is equipped with the calendar function, the V series cannot read and write to the calendar. Use the
built-in clock of the V series.
Available Device Memory
The available setting range of device memory varies depending on the PLC model. Be sure to set within the range available for
the PLC to be used. Use [TYPE] when assigning indirect device memory for macro programs.
P (input/output relay)
M (auxiliary relay)
L (link relay)
K (keep relay)
F (special relay)
T (timer/current value)
C (counter/current value)
D (data register)
TC (timer/contact)
CC (counter/contact)
1 : 1 / Multi-link2 / Multi-link2 (Ethernet)
9600 / 19200 / 38400 / 57600 / 76800 /
115200 bps
Device Memory
Setting
RS-232C
8 bits
1 bit
None
TYPE
00H Input relay: read only
01H
02H
03H
04H Read only
05H
06H
07H
09H
0AH
(Underlined setting: default)
Remarks
Remarks