Touch Switch (Ch) - Fuji Electric Monitouch V9 Series Connection Manual

1. Overview
1-54
Serial Port
* For details on printing, refer to the V9 Series Reference Manual.
Touch Switch (CH5)
Configure this setting when emulating touch switches on the RGB input screen.
The optional unit "GUR-01/GUR-10/GUR-11" (under development) is required for RGB input display.
For details on touch switch emulation, refer to the V9 Series Reference Manual.
Simulator
Configure this setting when saving a simulator communication program to a storage device (SD card or USB flash drive) in
addition to screen program data using the storage manager.
Item
Set the communication baud rate.
Baud Rate
4800/9600/19200/38400/57600/76800/115K BPS
Select an option for parity bit.
Parity
None / Odd / Even
Select a data length.
Data Length
7 bits / 8 bits
Select a stop bit.
Stop Bit
1 bit / 2 bits
Contents