Fuji Electric Monitouch V9 Series Connection Manual page 216

PLC
Make the PLC setting using the programming tool "GX-Developer". For more information, refer to the PLC manual issued by
the manufacturer.
Ethernet unit
PC parameter
Make the I/O assignment setting for the Ethernet unit.
Network parameter (Ethernet)
Item
Network type
Station I/O No.
Network No.
Group No.
Station No.
Ethernet operations
Item
Communication data code
Initial timing
IP address (DEC)
Enable Write at RUN time
Setting
Ethernet
Make settings in accordance with
the network environment.
Setting
ASCII code
Always wait for OPEN
(Communication possible at STOP
time)
Make settings in accordance with
the network environment.
Checked
9.1 PLC Connection
Remarks
For more information, refer to the manual of the PLC.
Remarks
It is not possible to write value from V9 to PLC when
unchecked.
If so, "error code received 7167" occurs.
9-23