Fuji Electric Monitouch V9 Series Connection Manual page 325

13-38 13. OMRON
13.2.5 E5CK
Communication Setting
Editor
Communication setting
Connection Mode
Signal Level
Baud Rate
Data Length
Stop Bit
Parity
Target Port No.
Temperature Controller
Mode
Option mode
Available Device Memory
The available setting range of device memory varies depending on the model. Be sure to set within the range available for the
model to be used. Use [TYPE] when assigning indirect device memory for macro programs.
D (parameter)
S (special command)
Item
1 : 1 / 1 : n / Multi-link2 / Multi-link2 (Ethernet) /
Displayed
Character
Sbit
LEn
Prty
bPS
U-no
Device Memory
Setting
1 : n Multi-link2 (Ethernet)
RS-232C / RS-422/485
4800 / 9600 / 19200 bps
7 / 8 bits
1 / 2 bits
None / Odd / Even
0 to 31
Setting Data
Stop bit
Data length
Parity
Baud rate
Communication unit No.
TYPE
00H
01H Write only, expansion code: fixed to 0
(Underlined setting: default)
Remarks
(Underlined setting: default)
Setting
1 / 2 bits
7 / 8 bits
None / Odd / Even
4800 / 9600 / 19200 bps
0 to 31
Remarks