Fuji Electric Monitouch V9 Series Connection Manual page 310

 IP address and port number of the PLC
Register on the [PLC Table] in [System Setting]  [Hardware Setting]  [PLC Properties]  [Target Settings].
 Network number and node number of the PLC, PLC table number of the relay PLC
Network number and node number of the V9
[System Setting]  [Hardware Setting]  [PLC Properties]  [DNA]
13.1 PLC Connection
PLC table No. = PLC node address
Set the IP address, port number and whether or
not to use the KeepAlive function to the same
number as the PLC node address.
Valid only for 1 : 1 connection
Set the network number and node
number of the PLC, and the PLC table
number of the relay PLC.
Set the network number and node
number of the V9 to the same number
as the one specified for [Local Port
No.] on the V9.
[Relay Target Network Table No.] is
disabled.
13-23