Fuji Electric Monitouch V9 Series Connection Manual page 176

8-4 8. LS
Cnet Frame Editor
Item
Channel
Baud Rate
Data Bit
Stop Bit
Parity
Station
Type
Available Device Memory
The available setting range of device memory varies depending on the PLC model. Be sure to set within the range available for
the PLC to be used. Use [TYPE] when assigning indirect device memory for macro programs.
P (input/output relay)
M (auxiliary relay)
L (link relay)
K (keep relay)
F (special relay)
T (timer/current value)
C (counter/current value)
D (data register)
TC (timer/contact)
CC (counter/contact)
RS232C / RS422
9600 / 19200 / 38400 / 76800 bps
None / Odd / Even
RS422 / RS485
Device Memory
Setting
76800: Valid only when [Channel: RS422 side] is selected
7 / 8 bits
1 / 2 bits
0 to 31
To be set only when [Channel: RS422 side] is selected
TYPE
00H PW as word device, input relay: read only
01H MW as word device
02H LW as word device
03H KW as word device
04H FW as word device, read only
05H
06H
07H
09H
0AH
(Underlined setting: default)
Remarks
Remarks