Fuji Electric Monitouch V9 Series Connection Manual page 378

AFP7CCS1M1
Calendar
This model is equipped with a calendar function; however, the calendar data cannot be written from the V series. Thus, time
correction must be performed on the PLC side.
Available Device Memory
The available setting range of device memory varies depending on the PLC model. Be sure to set within the range available for
the PLC to be used. Use [TYPE] when assigning indirect device memory for macro programs.
DT (data register)
X (external input)
Y (external output)
R (internal relay)
L (link relay)
LD (link register)
T (timer/contact)
C (counter/contact)
P (pulse relay)
E (error report relay)
SD (system data)
SR (system relay)
IN (direct input)
OT (direct output)
UM (unit memory)
TS (timer/set value)
TE (timer/elapsed value)
CS (counter/set value)
CE (counter/elapsed value)
I (index register)
*1 Specify the program block number. Indications on the screen configuration software are as follows.
*2 Specify the slot number. Indications on the screen configuration software are as follows.
Setting Item
RS-485
ON
Terminating
resistance setting
OFF
Device Memory
Contents
ON at termination
TYPE
00H *1
01H
WX as word device; X0 to X1F and X70 to X9F: read only
02H
WY as word device; Y0 to Y9, Y13, Y15 to Y1F, Y70 to Y9F: read only
03H
WR as word device, including special relays
*1
04H
WL as word device
05H *1
09H *1
Read only
0AH *1
Read only
*1
0BH
Read only
0CH Read only
0DH Read only
0EH WS as word device, read only
0FH
WI as word device, read only
*2
10H
WO as word device
11H *2
*1
12H
Double-word
13H *1
Double-word
*1
14H
Double-word
*1
15H
Double-word
16H Double-word
15.1 PLC Connection
Remarks
Remarks
*1
*1
*2
Example: 1: DT000100
Address number
Device type
Program block number
0: Global device
1 to 999: Local device
Example: 1: UM000100
Address number
Device type
Slot number: 1 to 99
15-17
*1