Fuji Electric Monitouch V9 Series Connection Manual page 217

9-24 9. MITSUBISHI ELECTRIC
Open setting
Item
Protocol
Host station Port No. (DEC)
Transmission target device IP address (DEC)
Transmission target device Port No. (DEC)
Built-in Ethernet port
PC parameter
Make the settings for the IP address and the open settings in the [Built-in Ethernet port] tab window.
Item
IP address (DEC)
Communication data code
Enable online change
(FTP, MC protocol)
Protocol
Open system
Host station port No. (DEC)
Setting
UDP
Make settings in accordance with the
network environment.
IP address of V9
Port No. of V9
Setting
Make settings in accordance with the
network environment.
ASCII code
Checked
UDP
MC Protocol
Make settings in accordance with the
network environment.
Remarks
It is not possible to set it from No. 5000 to 5002.
Remarks
For more information, refer to the manual of the
PLC.
It is not possible to write value from V9 to PLC
when unchecked.
If so, "error code received 7167" occurs.
It is not possible to set it from No. 5000 to 5009.