Fuji Electric Monitouch V9 Series Connection Manual page 365

15-4 15. Panasonic
FP-
Tool port setting
*1
System Register
410
413
415
*1 System register setting is enabled in the RUN mode.
COM port setting
*1
System Register
COM1 COM2
410 411
412
413 414
415
*1 System register setting is enabled in the RUN mode.
*2 For AFPG806COM1, set the switch attached to the back of the cassette as well.
SW1 to 2: OFF 19200 bps, ON 115 kbps
*3 In addition to system register setting, the station number setting is also possible with the station number setting switch. For more
information, refer to the PLC manual issued by the manufacturer.
FP1 / FP0 / FP-e
Tool port setting
*1
System Register
411
414
-
-
*1 System register setting is enabled in the RUN mode.
COM port setting
*1
System Register
412
413
414
415
*1 System register setting is enabled in the RUN mode.
Unit No. 1 to 99
Data Length 7 / 8 bits
Parity None / Odd / Even
Stop Bit 1 / 2 bits
Baud Rate 4800 / 9600 / 19200 / 38400 /57600 / 115k bps
Unit No.
1 to 99
Communication Mode Computer link
Data Length 7 / 8 bits
Parity None / Odd / Even
Stop Bit 1 / 2 bits
Baud Rate
4800 / 9600 / 19200 / 38400 /57600 / 115k bps
Data Length 7 / 8 bits
Baud Rate 9600 / 19200
Parity Odd (fixed)
Stop Bit 1 (fixed)
Communication Mode Computer link
Data Length 7 / 8 bits
Parity None / Odd / Even
Stop Bit 1 / 2 bits
Baud Rate 4800 / 9600 / 19200
Unit No. 1 to 99
Contents
Contents
*3
Contents
Contents
(Underlined setting: default)
(Underlined setting: default)
*2
(Underlined setting: default)
(Underlined setting: default)