17.1.3 X8 Series
Communication Setting
Editor
Communication setting
Item
Connection Mode
Signal Level
Baud Rate
Data Length
Stop Bit
Parity
Target Port No.
PLC
Make communication settings using the PLC software "XGPC" (version 1.0 or greater). For more information, refer to the PLC
manual issued by the manufacturer.
Channel Configuration
Setting Item
Driver
Baudrate
Parity
Stop bits
Data bits
Line Control
Node Address
Setting
1 : 1 / 1 : n / Multi-link / Multi-link2 /
Multi-link2 (Ethernet) / 1 : n Multi-link2 (Ethernet)
RS-232C / RS-422/485
4800 / 9600 / 19200 / 38400 / 57600 / 115K bps
8 bits
1 / 2 bits
None / Even
0 to 249
Setting
Xnet Slave
4.8K / 9.6K / 19.2K / 38.4K / 57.6K / 115.2K
NONE / EVEN
1 / 2
8
No Handshaking / No Handshaking (RS485 Network)
0 to 249
17.1 PLC Connection
(Underlined setting: default)
Remarks
Remarks
RS-232C connection: No Handshaking
RS-485 connection: No Handshaking (RS485
Network)
17-7