Fuji Electric Monitouch V9 Series Connection Manual page 326

13.2.6 E5CK-T
Communication Setting
Editor
Communication setting
Item
Connection Mode
Signal Level
Baud Rate
Data Length
Stop Bit
Parity
Station number
Temperature Controller
Mode
Option mode
Available Device Memory
The available setting range of device memory varies depending on the model. Be sure to set within the range available for the
model to be used. Use [TYPE] when assigning indirect device memory for macro programs.
D (parameter)
S (special command)
P (program parameter)
Indirect Device Memory Designation
15
n+0 Model (91 to 98)
n+1
n+2 Expansion code
n+3
When monitoring special command S14 (status), specify the group number in the expansion code.
00H: Group A
01H: Group B
1 : 1 / 1 : n / Multi-link2 /
Multi-link2 (Ethernet) /
1 : n Multi-link2 (Ethernet)
RS-232C / RS-422/485
4800 / 9600 / 19200 bps
None / Odd / Even
Displayed
Character
Sbit
LEn
Prty
bPS
U-no
Device Memory
8 7
Device type
Address No.
Bit designation
00 Station number
13.2 Temperature Controller/Servo/Inverter Connection
Setting
7 / 8 bits
1 / 2 bits
0 to 99
Setting Data
Stop bit
Data length
Parity
Baud Rate
Communication unit No.
TYPE
00H
S00 to 11 Write only, expansion code: fixed to 0
01H
S14 Read only, expansion code 0: group A / 1: group B
02H
0
(Underlined setting: default)
Remarks
(Underlined setting: default)
Setting
1 / 2 bits
7 / 8 bits
None / Odd / Even
4800 / 9600 / 19200 bps
0 to 99
Remarks
13-39