Fuji Electric Monitouch V9 Series Connection Manual page 38

Multi-link2 (Ethernet) table
 Master
Station number
Item
Multi-link2 (Ethernet) Table
Wiring
The connection between the master and the PLC is the same as the one for 1 : 1 connection. Refer to " Wiring" (page 1-10) in
" 1 : 1 Connection".
Use a LAN cable to connect a master with slaves.
IP address of slave
 For local port 1 (master)
Set the IP addresses of all V9 units used as slave to respective local port numbers.
 For local port 2 to 32 (slave)
Set the IP address of the master V9 for No. 1.
1.3 Connection Methods
 Slave
IP address of master
Station number
Contents
1-27