Fuji Electric Monitouch V9 Series Connection Manual page 61

1. Overview
1-50
Network table
This is an area for registering IP addresses of the MONITOUCH, PC and other devices.
Select [System Setting]  [Ethernet Communication]  [Network Table] and register.
Double-click a number in the No. column to display the [Network Table Setting] dialog. An IP address and other items can be
registered.
Network table number
Item
Port Name
*1
IP Address
*2
Send Timeout
*1
Port No.
*2
Retrials
*2
Device Protect
Internal Device
Memory Card Device
*1 *2
Default Gateway
*1 *2
Subnet Mask
*1 For more information on each setting item, see " Basics of ethernet settings" (page 1-51).
*2 Invalid if V9 units or PCs at other ports are registered. Only valid when set as the local port IP of the V9 unit.
Set the name of the V9 or the computer.
Set the IP address of the V9 or the computer.
Specify the timeout time to send the EREAD/EWRITE/SEND/MES command.
Set the port number of the V9 or the computer.
0 to 255
Set the number of retrials to be performed when a time-out occurs.
Check either check box to write-protect the device memory from computers or other stations.
Set the default gateway.
Set the subnet mask.
Contents