Fuji Electric Monitouch V9 Series Connection Manual page 426

KW7M
Mode
MODE 2
Stop bit: 1 (fixed)
Available Device Memory
The available setting range of device memory varies depending on the model. Be sure to set within the range available for the
model to be used. Use [TYPE] when assigning indirect device memory for macro programs.
DT (data register)
PLC_CTL
Macro command "PLC_CTL F0 F1 F2"
Contents
Status read
Display Item
PROT Protocol setting mode
NO. Station number setting mode
SPD Baud rate setting mode
Communication format
FMT
setting mode
Device Memory
F0
n
n+1
n+2
n+3
n+4
1 to 8
(PLC1 to 8)
n+5
n+6
n+7
15.2 Temperature Controller/Servo/Inverter Connection
MEWT: MEWTOCOL
1 to 99
4800: 4800 bps
9600: 9600 bps
19200: 19200 bps
38400: 38400 bps
8bit-o: data length 8 bits, odd parity
7bit-n: data length 7 bits, without parity
7bit-E: data length 7 bits, even parity
7bit-o: data length 7 bits, odd parity
8bit-n: data length 8 bits, without parity
8bit-E: data length 8 bits, even parity
TYPE
00H
F1 (=$u n)
Station number: 1 to 99
Command: 0000H
Model code 1
Model code 2
Version
Operation mode
0: Stopped
1: Running
Error flag
0: Normal
1: Error
Self-diagnosis error number
Return data: Data stored from Eco-POWER METER to V series
15-65
(Underlined setting: default)
Setting
Remarks
F2
2