Fuji Electric Monitouch V9 Series Connection Manual page 133

5-6 5. KEYENCE
5.1.4 KV-700
Communication Setting
Editor
Communication setting
Item
Connection Mode
Signal Level
Baud Rate
Data Length
Stop Bit
Parity
Target Port No.
PLC
KV-700 (CPU Modular Port)
No particular setting is necessary on the PLC.
KV-L20
Unit editor setting
Port
Port 1
Port 2
* These settings can be checked on the access window of the CPU. For more information, refer to the PLC manual issued by the manufacturer.
KV-L20R
Unit editor setting
Port
Basic Port
Port 1
Port 2
* These settings can be checked on the access window of the CPU. For more information, refer to the PLC manual issued by the manufacturer.
Setting
1 : 1 / Multi-link2 / Multi-link2 (Ethernet)
RS-232C / RS-422/485
9600 / 19200 / 38400 / 57600 bps
8 bits
1 bit
Even
0 to 31
Item
Operation Mode
RS/CS Flow Control
Operation Mode
Interface
Station No.
Item
Station No.
Operation Mode
RS/CS Flow Control
Operation Mode
Interface
Setting
KV BUILDER Mode
No
KV BUILDER Mode
RS-232C / RS-422A
0 to 9
Setting
0 to 9
KV BUILDER/KV STUDIO Mode
No
KV BUILDER/KV STUDIO Mode
RS-232C/RS-422A/485 (4-wire
system)
(Underlined setting: default)
Remarks
Remarks
Change the setting using the PORT 2
selector switch attached to the side.
PORT2
232C 422A VT
Remarks
Common to Port 1 and 2.
PORT 2 selector switch attached to
the side
PORT2
232C 422A 485 (2)
485 (4)