9-32
9. MITSUBISHI ELECTRIC
PLC
Make the PLC setting using the programming tool "GX-Developer". For more information, refer to the PLC manual issued by
the manufacturer.
L Series Built-in Ethernet
Make the settings for the IP address and the open settings in the Built-in Ethernet port tab window.
IP address (DEC)
Communication data code
Enable online change
(FTP, MC protocol)
Protocol
Open system
Host station port No. (DEC)
Item
Make settings in accordance with the
network environment.
Binary code
Checked
UDP/TCP
MC Protocol
Make settings in accordance with the
network environment.
Setting
For more information, refer to the manual of the
PLC.
It is not possible to write value from V9 to PLC
when unchecked.
If so, "error code received 7167" occurs.
Set the same protocol as the one set on the
editor.
It is not possible to set it from No.5000 to 5009.
Remarks