Fuji Electric Monitouch V9 Series Connection Manual page 294

CPM2A
Communication condition setting switch
Communication
Condition Setting Switch
O
ON
OFF
OFF
PLC system setting
Item
User Setting Checked
Baud Rate 4800 / 9600 / 19200
Parameter 1, 7, 2, E
Mode Host link
Unit No. 00
CPM1A/CPM2C
Communication port function setting switch (only for CPM2C)
Communication Port
Function Setting Switch
SW1
OFF
ON
PLC system setting (peripheral port)
Item
User Setting Checked
Baud Rate 4800 / 9600 / 19200
Parameter 1, 7, 2, E
Mode Host link
Unit No. 00
Setting
The peripheral port and RS-232C port are operated according to the
communication protocol and communication format set on the PLC system setting.
Setting
Setting
The RS-232C port is operated according to the communication protocol and
communication format set on the PLC system setting.
Setting
13.1 PLC Connection
Contents
Remarks
The system setting can be made by specifying a value for the
address using a programming console.
For more information, refer to the PLC manual issued by the
manufacturer.
Contents
Remarks
The system setting can be made by specifying a value for the
address using a programming console.
For more information, refer to the PLC manual issued by the
manufacturer.
13-7