Fx2N/1N Series Cpu - Fuji Electric Monitouch V9 Series Connection Manual

9.1.20 FX2N/1N Series CPU

Communication Setting
Editor
Communication setting
Item
Connection Mode
Signal Level
Baud Rate
Data Length
Stop Bit
Parity
Target Port No.
PLC
No particular setting is necessary on the PLC.
Available Device Memory
The available setting range of device memory varies depending on the PLC model. Be sure to set within the range available for
the PLC to be used. Use [TYPE] when assigning indirect device memory for macro programs.
D (data register)
TN (timer/current value)
CN (counter/current value)
32CN (32-bit counter/current value)
M (auxiliary relay)
S (state)
X (input relay)
Y (output relay)
TS (timer/contact)
CS (counter/contact)
*1 For items where double-words can be used (Num. Display, Graph, Sampling), data is processed as double-words.
For those where bits or words can be used, data is processed as words consisting of lower 16 bits.
For input:
For output:
Setting
1 : 1 / Multi-link2 /
Multi-link2 (Ethernet)
RS-422/485
9600 / 19200 / 38400 bps
0 to 31
Device Memory
Upper 16 bits are ignored.
"0" is written for upper 16 bits.
7 bits
1 bit
Even
TYPE
00H D8000 and later: special register
01H
02H
03H *1
04H M8000 and later: special relay
05H
06H Read only
07H
08H
09H
9.1 PLC Connection
(Underlined setting: default)
Remarks
Remarks
9-35