Fuji Electric Monitouch V9 Series Connection Manual page 235

9-42 9. MITSUBISHI ELECTRIC
Open setting
Protocol
Fixed buffer
Fixed buffer communication procedure
Pairing open
Existence confirmation
Host station Port No. (DEC)
Transmission target device IP address (DEC)
Transmission target device Port No. (DEC)
Available Device Memory
The available setting range of device memory varies depending on the PLC model. Be sure to set within the range available for
the PLC to be used. Use [TYPE] when assigning indirect device memory for macro programs.
D (data register)
TN (timer/current value)
CN (counter/current value)
32CN (32-bit counter/current value)
M (auxiliary relay)
S (state)
X (input relay)
Y (output relay)
TS (timer/contact)
CS (counter/contact)
R (extension register)
*1 For items where double-words can be used (Num. Display, Graph, Sampling), data is processed as double-words.
For those where bits or words can be used, data is processed as words consisting of lower 16 bits.
For input
For output
Item
UDP
Receive, Send
Procedure exist (MC)
Enable
No confirm
Make settings in accordance with the
network environment.
IP address of V9
Port No. of V9
Device Memory
Upper 16 bits are ignored.
"0" is written for upper 16 bits.
Setting
TYPE
00H D8000 and later: special register
01H
02H
03H *1
04H M8000 and later: special relay
05H
06H Read only
07H
08H
09H
0BH
Remarks
1025 to 5548, 5552 to 65534
Remarks