Fuji Electric Monitouch V9 Series Connection Manual page 297

13-10 13. OMRON
Basic setting DIP switch
DIP Switch
PLC system setting (host link port)
Item
Default Setting
Port Setting Baud Rate
Parameter
Unit No.
Host Link Unit
Communication selector switch
Communication Selector Switch
RS-232
RS-422
Unit No. selector switch
Unit No. Selector Switch
NODE
No.
0
1
X10
Basic setting DIP switch
DIP Switch
ON
CPU advanced unit system setting
Set parameters for communication port 1 or 2.
No. 3 OFF: Host link communication
OFF: The host communication port is operated
No. 4 according to the communication condition set
on the PLC system setting.
No. 6 ON: With terminating resistance
Unchecked
4800 / 9600 / 19200
7, 2, E
00
Communication port 2
Upper: RS-232C
Lower: RS-422
Communication port 2 Unit No.: 00 to 31 (DEC)
0
0
X10
OFF: The link unit is operated according to the
No. 1 communication condition set on the CPU
advanced unit system setting.
No. 2 ON: Switching CTS for communication port 1
No. 3 ON: Switching CTS for communication port 2
No. 4 OFF: Not used
No. 5 OFF: Normal operation
Setting
Setting
The system setting can be made by specifying a value
for the address using a programming console.
For more information, refer to the PLC manual issued
by the manufacturer.
Setting
Setting
Setting
ON:
Fixed to 9600 bps for baud rate, 0 for station
number, 7 bits for data length, 2 bits for stop bit and
even parity
CPU fixed
Invalid during RS-422 communication
Remarks
ON:
Fixed to 9600 bps for baud rate, 0 for station
number, 7 bits for data length, 2 bits for stop bit
and even parity
Invalid during RS-232C communication
Remarks
Remarks